SPEC-STAT®
STATIC DISSIPATIVE PERMANENT CLEAR COATING
WATER BORNE ACRYLIC

Spec-Stat® water borne acrylic is an electrostatic dissipative permanent coating for direct application to plastics, laminates, anodized aluminum, wood, paper, and other surfaces.

Spec-Stat® dries as a semi-transparent clear coating which does not depend on moisture, amines, or surfactants to achieve its static dissipative properties.

Spec-Stat® may be applied with a conventional spray gun and flexographic application to film and sheet stock. Prior to painting, apply Spec-Stat® to a small test area to check compatibility and adhesion with the substrate.

Spec-Stat® is recoatable. Clean and dry surface before repainting.

Coating type
Clarity
Color
Resistivity
Recommended Application
Static Decay

Water Borne Acrylic
Semi-Transparent
Colorless
10^5 to 10^10 ohms/sq. at 100 volts
Spray and Flexography
1000 volts to 100 volts in 0.5 sec.

After painting, clean up is with warm water and soap.

Statements and methods contained herein are based upon the best information and practices known to Specialty Coatings Company. However, Procedures for applications are suggestions only and are not to be construed as representations as to performance results.